Quote

Schedule
Service

Terex Utilities Workshop Registration

Attendees of a workshop will participate in numerous activities across the training. The hands-on activities are integrated with the training material and the entire class will be delivered in a shop environment.  The training is designed to educate participants in maintenance, trouble shooting and repair procedures for the product focused on during the workshop.

Currently we are offering Workshops on the following products, others will be added based on customer requests.

Examples of the hands-on tasks performed during the Distribution Aerial Workshop (subject to change):

  • Understanding and using load charts
  • Perform a periodic inspection
  • Troubleshoot PTO issues
  • Change the direction of a pump
  • Perform a flow test on a pump and verify system pressure
  • Take apart and reassemble a valve
  • Verify the setting on a holding valve
  • Take apart and reassemble a cylinder
  • Take an oil sample
  • Troubleshoot interlock issues
  • Perform a leakage test on outriggers
  • Determine if fiberglass damage is repairable
  • Cylinder drift testing
  • Perform a deflection test
  • Check backlash
  • Inspect rope for damage
  • Inspect hooks for damage
  • Inspect chain for damage
  • Troubleshoot leveling problems

Examples of the hands-on tasks performed during the Digger Derrick Workshop (subject to change):

  • Understanding and using load charts
  • Perform a periodic inspection
  • Troubleshoot PTO issues
  • Change the direction of a pump
  • Perform a flow test on a pump and verify system pressure
  • Take apart and reassemble a valve
  • Verify the setting on a holding valve
  • Take apart and reassemble a cylinder
  • Take an oil sample
  • Perform a leakage test on outriggers
  • Replace hanger latch and spring
  • Set boom HOP
  • Bleed and set rotation HOP
  • Troubleshoot interlock issues
  • Determine if fiberglass damage is repairable
  • Cylinder drift testing
  • Perform a deflection test
  • Check backlash
  • Identify Critical Welds
  • Check reduced pressure
  • Match cylinder counterbalance valves
  • Boss repair kit
  • Troubleshoot the pole guide interlock system
  • Install seals on the trombone tube
  • Flow test a digger head
  • Change out a digger spring

Other troubleshooting scenarios that may be present during the training will also be addressed.

Complete the registration form with the attendee’s information and choose the desired workshop. This information will be used to register the attendee and communicate with them as the class approaches. 

Note: If you experience issues completing or viewing the form, please use Google Chrome.


Distribution Aerial Workshop

HR/HRX, TC/TCX, SC, XT, TL, and LT
2 of 10

Seats Remaining

June 3rd - 5th, 2025

$1,300 per person

TM Workshop

5 of 10

Seats Remaining

June 16th - June 19th, 2025

$1,800 per person

TM Workshop

5 of 10

Seats Remaining

July 21st - July 24th, 2025

$1,800 per person

Digger Derrick Workshop

0 of 10

Seats Remaining

April 29th - May 1st, 2025

$1,300 per person

Workshops

Hotel Suggestions

Hampton Inn & Suites
2720 9th Ave SE, Watertown, SD 57201
(605) 878-1800
 
Holiday Inn Express & Suites
2803 8th Ave SE, Watertown, SD 57201
(605) 954-1800
 
Country Inn & Suites by Radisson
3901 9th Ave SE, Watertown, SD 57201
(605) 886-8900
 
Quality Inn & Suites
35th St Cir, Watertown, SD 57201
(605) 886-3010
 
My Place
3409 8th Ave SE
(605) 878-3133
 

Local Airports

Watertown Regional Airport (ATY)
 
Sioux Falls Regional Airport (FSD) - 1.5 hour drive
 
Minneapolis - St. Paul Airport (MSP) - 4 hour drive
 

Workshop Registration

After invoicing, payments can be made via check, wire, or credit card.

Attendee substitutions are allowed at any time.

Cancellations within 30 days of the Workshop will be charged the full cost of the Workshop.

Class Size is Limited

Complete registration form with Purchase Order. Once class size is full, applicants will be placed on a waiting list.
Please select the workshop you would like to register for.

Email Purchase Order to techsupport@terex.com

Please email purchase order to techsupport@terex.com
(example: Gluten Free, Non-Dairy, Vegetarian, etc.)

Primary Registration and Payment Contact

This individual will serve as the primary point of contact for any adjustments or inquiries related to registration or payment for the attendee.
By checking this box you are consenting to receive communications from Terex Utilities. You can modify your selection or unsubscribe at any time by visiting the email preference center.
Also of Interest: